Your browser (Internet Explorer 7 or lower) is out of date. It has known security flaws and may not display all features of this and other websites. Learn how to update your browser.

X
IC-FR3000 & IC- FR4000 Repeater

Bridging the gap between bands

Request Information Datasheet

50 Watt continuous full duty cycle operation

This repeater looks as good as it performs. A rugged heatsink, large cooling fans and a high performance power module provide the repeater with a stable 50W at full duty cycle operation.


Automatic battery backup system

A built-in backup system supports automatic switching to an external power supply (13.6V DC) if the AC power supply fails.


Multiple CTCSS & DTCS tone memories with multiple memory channels

Up to 16 CTCSS/DTCS tones (TX/RX tones respectively) can be programmed in a channel. This feature allows you to share a channel with multiple user groups. You can also give priority/exclusive use to a specified group simply by programming different tones to another memory channel. Ideal for many different applications.


Built-in 2-Tone, 5-Tone, DTMF encoder & decoder

Multiple signaling systems are equipped as standard. These systems are fully compatible with Icom F-series radios.


Internal space for duplexer and isolator

The repeater has an internal space to install a duplexer and isolator*. The controls of the duplexer are accessible from the front of the repeater without disassembly. Faster and easier maintenance and adjustment is possible.

* Ask your dealer for details about available duplexers and isolators.


Telephone interconnect capability


DTMF remote control capability

You can control the repeater from a remote location over the air or over a phone line with DTMF.


Optional wall mount bracket, MB-77 and 19 inch rack mount bracket, MB-78


Additional Features

  • Master/Slave backup operation by connecting two repeaters
  • Self check function checks for internal errors and alerts with a beep sound or with a phone call
  • Accessory connector (D-sub 25-pin) on the rear panel for trunking controller including LTR, PassPort, SmarTrunk?? and MPT1327
  • Compatible with VEGA tone remote control system
  • 5-Tone relay function
  • Optional Voice Scrambler UT-109 or UT-110
  • CW ID transmitter (DTMF or 5-Tone also selectable)
  • Password and kill/stun function for security
  • 16-digit alphanumeric display convenient for base station operation
  • A programmable button gives access to a customized function

 

All trademarks are the properties of their respective holders.
General
Frequency coverage (MHz)
IC-FR3000
IC-FR4000
148-172MHz, 150-174MHz
400-430MHz, 430-450MHz, 450-480MHz
No. of channels 32 channels
Channel spacing 12.5/25KHz
PLL channel step 5, 6. 25KHz (2.5kHz, VHF repeater operation only)
Frequency stability
VHF
UHF (U.S.A. version)
UHF (Other versions)
±2.5ppm
±1.5ppm < /br> ±2.5ppm
Operating temperature range -30°C to +60°C
-22°F to +140°F
Power supply voltage 13.6V DC
100-120V AC (50/60Hz)*
220-240V AC (50/60Hz)*
*Depending on version
Current drain (at 13.6 V DC)
Tx

Rx
VHF (at 50W) 15A
UHF (at 50W) 20A
Max. audio 2A typ.
Stand-by 1A typ.
Antenna impedance 50O (Type-N × 2)
Dimensions (proj. not incl.) 410(W) × 110(H) × 360(D) mm
16 5/32 × 4 11/32 × 14 3/16 in
Weight 12 kg; 26.4lb (approx.)
Transmitter
Output power 50W (high), 10W (low) selectable (at 13.6V DC)
Max. frequency deviation ±5.0kHz/±2.5kHz (wide/narrow)
Spurious emissions 70dB
Adjacent channel power 70/60dB (wide/narrow)
Hum and noise 40/34dB (wide/narrow)
Microphone impedance 600 ohm (8-pin modular)
Receiver
Sensitivity 0.25µV typ. (at 12dB SINAD)
Adjacent channel selectivity 70/60dB (wide/narrow)
Spurious response 70dB
ntermodulation rejection ratio 70dB
Hum and noise ratio 40/34dB (wide/narrow)
Audio output power 2.5 W typ. at 10% distortion with a 4 ohm load
External speaker connector 2-conductor 3.5 (d) mm (1/8?)/4O
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.
Standard MIL 810C MIL 810D MIL 810E MIL 810F
M = Methods, P = Procedures
M P M P M P M P
High Temp. 501.1 1 501.2 1,2 501.3 1,2 501.4 1,2
Low Temp. 502.1 1 502.2 1,2 502.3 1,2 502.4-3 1,2
Vibration 514.2 7,10 514.3 1 514.4 1 514.4 1
Shock 516.2 1,2,5 516.3 1,4 516.4 1,4 516.5 1,4
Measurements made in accordance with EIA/TIA-603-A. Compatibility of functions for use with a telephone line may not work in some countries. All stated specifications are subject to change without notice or obligation.
Rear View

---- Coming Soon ----

About Us
We have the technology, the talent and the innovative spirit to provide you with perfect solutions for your every business need.

We give you a world of endless possibilities
Testimonials
"Excellent support received from Express Automation ltd, competitive pricing & user friendly machines."
"Timely service, follow up & feedback given, achievable promises made by the Express Automation sales/support teams that are fulfilled. Products/service delivery is very good, bodering on excellent. Keep up improving on the already set high standard."
"Excellent support & timely responses received from Express Automation Ltd as compared to the competition."
"Very happy & satisfied with the response & turnaround time & follow up received from Express Automation."
"The support team is always on time & we appreciate that. We have had a healthy business relationship with Express Automation Ltd & we will continue working together."
"Prompt response time to support/service requests. Keep up the good work."
"Excellent response & turn around times to support/service requests & a commendable services offered by engineers. Keep up the quality services."
Queries
* Email:
* Phone:
* Comments: