Your browser (Internet Explorer 7 or lower) is out of date. It has known security flaws and may not display all features of this and other websites. Learn how to update your browser.

X
Vx-5500

The VX-5500 is the latest in Public safety driven mobiles. With many features requested from Police and Fire agencies, the VX-5500 is the Public safety mobile you can count on. Designed and built to demanding standards, the VX-5500 can be counted on, year after year.

Request Information Datasheet

The features that are built in allow the dealer to program the functions critical to each individual customer. This allows the radios to have a long list of features while at the same time, keep the front panel clean and easy to use.

The remote capabilities also provide a high level of installation options !


Highlights of the VX-5500

  • Highlights of the VX-5500
  • The VX-5500 can be configured for many types of installation requirements.
  • Single Head Remotes
  • Dual Head Remotes
  • Dual Band (2 RF Decks) Single or Dual Head Remotes
  • You can ever remote three Control heads to one RF Deck !

The VX-5500 Features

Audio Companding The VX-5500 adds the benifit of Audio Companding for that full audio sound even on narrow band channels !

Top Notch Receiver Specifications
Building on the foundation of the VX-4000's rock solid RF design, the VX-5500 boast improved receiver specifications in almost every category!

Alignment/Service Related
CT-88 The CT-88 cable is used in conjunction with the FIF-8 box to make adjustments to the alignment. This is for the VX-4000/VX-5500/VX-6000 mobiles. The CT-88 connects from the DB25 accessory port of the mobile, to the FIF-8 box interfaced to your PC.
FIF-8 Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).
Base Stations
BSC-5000 Base Station Console. This is a 'build to suit' type base station. It uses any band of VX-4000, VX-5500 or VX-6000 mobile. So, if you need mid power, high power, UHF or Lowband, we have you covered.
Features of the BSC-5000:
Front mounted speaker - The large front mounted speaker makes for clear and loud audio as needed.
Date / Time indicator - There is a built in Date / Time clock on the front display. 12 or 24-hour format is available.
DC Backup - The BSC-5000 has rear connections for a DC backup input. In case you lose primary power, the DC backup battery input will take over.

Built in power supply - The BSC-5000 fully contains a 30 Amp DC power supply capable of delivering enough power to run even the 120 W Lowband VX-6000.

There is an optional unique desk microphone available as well, MD-11B8J.
Control Head
CNT-5000 Compact motorcycle control head for the VX-4000, VX-5500 and VX-6000 mobiles.
CNT-6000 Control Head for multi-head configurations. Requires T9206958A for dual head remotes.
VCS-5000 Channel Selector Control Panel extension
Cover plate
RMK-4000B Cover plate for the RF Deck in Remote Applications
RMK-4000H Cover plate for the Control Head (Includes mounting bracket and hardware)
RMK-5000B Dedicated Motorcycle Control Head. Built for ease of use and all weather operation.
DC cables
CT-96PS Ignition Sense Cable Ignition Sense Cable for the VX-4000, VX-5500 and VX-6000 mobiles.
E-DC-22 30 ft DC cable for VX-4000/-5500 mobiles.
DC Noise Filters
LF-1 Plug-In Line Filter
Encryption
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
Microphone
MD-12A8J/MULTI PIN PLUG DESKTOP MIC MD-12A8J/MULTI PIN PLUG DESKTOP MIC
MH-25B7A Vertex Mobile Microphone (Supplied w/radio)
MH-53A8A Heavy Duty Weatherproof Noise Canceling DTMF Microphone for the CNT-5000 remote Control Head.
MH-53B7A The MH-53B7A is a Noise-Canceling Microphone with DTMF keypad.
MH-53C7A The MH-53C7A is a Heavy Duty Microphone .
Mounting Bracket
MMB-75 Mobile Mounting Bracket ( Supplied w/radio)
MMB-76 Locking Mobile Mounting Bracket
MMB-88 This is a mounting bracket, which is a base plate for the CNT-5000 and MLS-200. The MMB-88 mounts to a motorcycle. The CNT-5000 and MLS-200 then mount to the MMB-88, side by side.
Power Supply
FP-1023 External Power Supply 23 Amp
Programming and Installation
CT-105 FIF-10 interface cable to connect: VX-530/600/800/900 Portables also VX-5500/VX-6000 Mobiles.
CT-70 Radio Programming Cable (Requires VX VPL-1 Cable)
CT-72 Cloning Cable (Set-to-Set Clone)
FIF-10A FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.
FRB-4D Alignment Interface Box (Required for All alignment) *
INST-OPT Installation Charge.
PROG/ADD Factory Radio Programming (Each additional channel after 1st)
PROGRAMMING Factory Radio Programming (single channel only)
VX MPI Programming Kit for the MDC1200 and the FVP-35
VX VPL-1 Programming cable from PC. Check specific models for additional cable pigtails.
Remote Cable
CT-81 Remote Cable for RMK-4000 series (20 ft) (RF Deck to Control Head)
CT-82 Remote Cable for RMK-4000 series (8 ft) (RF Deck to Control Head)
CT-83 Remote Cable for RMK-4000 series (2 ft) (RF Deck to RF Deck)
CT-93 Remote Cable for RMK-4000 series (30 ft) (RF Deck to Control Head)
Signaling
CN-6 Connector Board (to be used with the installation of third-party options.)
F2D-8 Two-Tone Decoder. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000)
F5D-14 Five-Tone Enc/Dec Unit. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000)
FIF-7A Interface Board (for VX-4000 / 5500 / 6000 with FVP-25, FVP-35, F2D-8 & VTP-50 option boards)
FRB-4D Alignment Interface Box (Required for All alignment) *
Replaces the FIF-7
FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200 MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.
VME100 VME-100 BOARD FOR MDC1200 DIGITAL ANI
Speaker
MLS-100 External Speaker (12 Watt Peak)
MLS-200 12 W peak external weatherproof speaker.

---- Coming Soon ----

About Us
We have the technology, the talent and the innovative spirit to provide you with perfect solutions for your every business need.

We give you a world of endless possibilities
Testimonials
"Excellent support received from Express Automation ltd, competitive pricing & user friendly machines."
"Timely service, follow up & feedback given, achievable promises made by the Express Automation sales/support teams that are fulfilled. Products/service delivery is very good, bodering on excellent. Keep up improving on the already set high standard."
"Excellent support & timely responses received from Express Automation Ltd as compared to the competition."
"Very happy & satisfied with the response & turnaround time & follow up received from Express Automation."
"The support team is always on time & we appreciate that. We have had a healthy business relationship with Express Automation Ltd & we will continue working together."
"Prompt response time to support/service requests. Keep up the good work."
"Excellent response & turn around times to support/service requests & a commendable services offered by engineers. Keep up the quality services."
Queries
* Email:
* Phone:
* Comments: